Today’s chandeliers are not justust an illumination fixture,
They are also used as ornaments for interiors. Moreover, to installation of a chandelier isn’t that easy.
This is why J&S lighting furniture installers have documented the whole installation process for chandeliers, to ensure that those wanting to build chandeliers are able to learn!
1.Open the package and examine the contents according to instructions.
Chandeliers aren’t just for decorative lighting. They also incorporate numerous other accessories.
It’s not widely used. New installers can check all the parts in line with the bulb’s installation instructions.
If you are unable to locate the correct place, you can contact the merchant in time.
The customer should be present when the lighting host is opened. Installation can only be confirmed when the lighting doesn’t exhibit any issues.
2.Installation of chandelier
1.First assemble the lamp’s body of the chandelier as well as thesurrounding arms of the lamp (where the lamp is installed).
2.After taking apart the strip of light body as depicted in the above picture you will be able to see where the light arms may be connected.
After connecting the lamp arms After connecting the lamps must be securedone by one with a wrench. The lamp arms must be distributed evenly after installation. If not the installation is complete. The chandelier needs to be angled toward the side of the taller arm.
Make sure that the wires are connected correctly on the lamp arm. Do not connect the wrong wire. If you install a new light bulb and then find that one of the arms does not light up the arm, you’ll have to take it off to perform maintenance.
The chandelier and lamp are being put together. the top plate) is installed.
5.Install the holder for your ceiling lamp in the position of installation you’ve chosen.
Installation is similar to a ceiling light. Place the lamp holder into the hole and then pull it away. Next, use a drill to drill into the hole. Install the lamp holder.
Connect the main power source for your ceiling to a chandelier power supply.
7.Then adjust the height of the chandelier and add the additional pieces (glass bowl and shell) above the arm.
Install the decorative cover, that’s the cover at the base. Then switch on the power supply test to verify if it starts.
You should also pay attention to the following:
Fix chandelier on ceiling hole
The first method of installing a chandelier integrated. Install a metal sheet on the ceiling. Next, install a series of protruding braces onto the back side of the LED panel light. Finally, insert the LED panel on the bracket that is compatible with the slot for the sheet of metal. It can be fixed to the ceiling. The bracket and light surface have to be adjusted in order to compensate for the thickness of the ceiling. In the event of a non-compliance the LED panel can be installed lower or higher.
Installing the second option is straightforward: simply drill screws in the ceiling, and then slide intothe frame of the ceiling. Then install the panel on the ceiling. The light on the panel will be put into a fixed mounting frame. Easy and quick.
Wire hanging is the 3rd kind of installation: put the installation portion of the hanging wire on the ceiling, then lock the screws. (The hanging wire was installed in the factory. The hanging wire is vertical and the component is hanging by the LED back light. Installing and saving money is simple. It is important to inquire if the suspension components are standard components or optional components.
Installation Precautions
- Do not exceed the standard working voltage range of this item.
- Please ensure that you turn off the power prior to installation.
- Make sure to read the instruction carefully before putting the product in place;
- Make sure you verify that the product is water-proof as well as shockproof and electricity-proof.
- This product should only be only used indoors.
How do you set up an integrated chandelier that is ceiling-mounted?
- Decorate the connector device with wooden bricks and iron parts to adjust the angle of the chandelier based on the errors. It can be fixed by welding to, nailed, screwed etc. Once you have completed these steps the chandelier’s installation is almost complete.
- Pick the spot for the chandelier according to the height it’s set within your living area. This way you will avoid putting wiring into the ceiling.
- The decorative materials should be incorporated in the structural layer. Ensure that the position is precise and that the chandelier remains in specific positions to allow for adjustment of the chandelier.
- Connect slings booms to connect devices.
the last thing to mention:
It’s definitely not advisable to put chandeliers in normal commercial houses, especially those with low floor elevations.
The majority of chandeliers that are available today emit the light upwards. It is recommended to utilize them with downlights or spotlights to make them a traditional ceiling mode.
Nowadays, most chandeliers employ GU10 series lights as their light sources, which are extremely powerful, but they cannot effectively disperse heat, and are vulnerable to breaking. The traditional E27 or E14 bulbs require a bigger lamp head and lampshade, which may feel low.
The installation of a practical and efficient chandelier is recommended. It is able to adjust the color temperature and light.