Today there are ever more wealthy people, and a lot of people are keen on making their home’s lighting warm and cozy.
Many people who own houses hope to install outdoor wall lights in their outdoor spaces.
What exactly is an outdoor wall lamp?
What is the ideal level to place light fixtures for outdoor walls?
This article can be a useful resource if you’re not sure regarding these two elements and are considering installing outside lights.
1. What are lighting for outdoor walls?
The outdoor wall lamp is one type of lamp named afterits outdoor use.
It is usually installed on outdoor walls, and some products can also be placed on outdoor lamp column walls.
Wall lamps for outdoor use are more waterproof and have enclosed structures.
This will help prolong the life of lamps for outdoor use in preventing them from becoming affected by water and corrosion.
Wall lamps for outdoor use generally provide the following advantages:
Soft lighting generous stylish and practical. Easy installation and strong decorative features.
For urban green lighting, for creating urban communities that are high-quality and civilized and enhancing the lighting culture of residential areas,
outdoor wall lamps are certainly the most important lighting fixtures to have.
2. Installation of a wall lamp for outdoor use:
Outdoor wall lamps can be installed on the walls or in columns.
When you install a brick wall, wooden bricks (wooden wedges are not allowed to replace wooden bricks) or metal components must be cleaned before wall construction.
When installing lighting fixtures,
The lamp stand should be affixed to wooden bricks or metal parts.
The components made of metal should be either pre-attached to the column, or clamped onto the column.
The wall light outside is then to be placed directly on the metal parts.
The elevation of the lower edge of the lamp’s outdoor side from the ground is 1.8m, and the height of the lamp’s outdoor components on the four sides may differ,
But the size of the outdoor wall light on the same wall should be shared.
Outdoor wall lights must be designed to match the local landscape.
and it is best to opt for a sealed switch.
Due to the frequent occurrence of rain and sun exposure outdoors, ceramic switches are recommended for humid environments.
The outdoor wall light should be wired according to the type of switch chosen.
Pull wire switches are safe and economical for wiring that is exposed. In accordance with the wiring conditions, determine whether concealed wiring is necessary.
You can use embedded keyboard switches to hide wiring behind walls.
The operation organization of outdoor wall lamp switches must be delicate and light
The actions of the employees should be executed by instantaneous switching of the organization.
The connection and disconnection needs to be clearly identified, with the exception of for double-throw switches and pull switches.
The pull wire in the lamp’s outdoor pull switch should be insulated rope
A minimum length of 1.5m is required.
The pull wire organization and pull rope shouldn’t fail when used with a force of 98N for a period of 1 minute. Outdoor wall light switches are generally installed near the doors or other easily accessible places.
Outdoor wall lighting is a necessity in public spaces, and it can be an important factor at nighttime.
If they’re crafted properly by the designer they will be a beautiful addition to the city’s nightlife.
During social events outdoors, wall lights can fall and cause injuries to people.
We must take care of public spaces because they make our lives safer. This article provides a detailed overview of the pertinent knowledge about outdoor wall lamps,
If you’re planning to install outdoor wall lamps and make your outdoor wall lighting more relaxing,
It is recommended to refer to the installation precautions for wall lights that are outdoor in this article.
Installing LED wall light fixtures
First, choose a suitable wooden base (board) or lamp base based on the appearance of the lamp,
Place the lamp on top.
The edge left should be uniform. After that, you can use an electric drill to make the outlet as well as install holes in the wooden board.
The lamp head is swung from the hole that is in the wooden plate by making holes in the bottom of the plate.
Secure the joint and insert it into the lamp box.
Align the wooden stand or wooden board to the lamp head box,
Attach it securely on a wall, then make use of machine screws to attach the wooden stand directly to the ears of an empty box. If the wooden board is constructed of wood, make use of expansion tubes to secure the board.
Be sure that the lamp base or the wooden stand is straight and flat.
Use machine screws to fix the lamp to the stand made of wood (board) or the lamp base. Then, make sure the lamp matches the light bulb lamp or shade.
To install outdoor wall lights an adhesive pad that is waterproof must be positioned between the lamp’s base plate or bracket and the wall
A drainage hole must be made.
The glass cover of large lighting fixtures installed in important places
must be designed to stop it from breaking and splashing down (except for design specifications).
Generally, a protective net constructed of transparent nylon wire can be utilized,
The dimension of the mesh is determined by the specific situation.